An arrow on the
instrument panel cluster
flashes in the direction of
the turn or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is complete.
The lever returns to its starting position when it is released.
If after signaling a turn or a lane change the arrows flash rapidly or do not come on, a signal bulb could be burned out.
Have the bulbs replaced. If the bulb is not burned out, check the fuse. See Fuses and Circuit Breakers.
Chevrolet Cobalt Service & Repair Manual. Precautions
Battery Ground Cable
Prior to service, disconnect battery
ground cable and isolate as required.
Fuel System Pressure Relief
1.
Disconnect battery ground cable, isolate
as required.
2.
Install fuel pressure gauge tool N ...