Chevrolet Cobalt Service & Repair Manual: Compressor, Replace
1. |
Evacuate system as outlined under "Refrigerant
Recovery" in "General Service" on main menu selection. |
2. |
Raise and support the vehicle. |
3. |
Remove righthand front fender inner
liner screws and pin type retainers, then the liner. |
4. |
Rotate drive belt tensioner counterclockwise
to release tensioner spring tension. |
6. |
Disconnect A/C compressor electrical
connector. |
7. |
Remove A/C compressor hoses from compressor,
Fig. 1, then seal hose opening. |
8. |
Remove and discard sealing washers. |
9. |
Remove compressor mounting bolts,
Fig. 2, then the compressor. |
10. |
Reverse procedure to install, noting
the following: |
|
a. |
Torque compressor hoses to 12-15
ft. lbs. |
|
b. |
Torque compressor mounting bolts
to 18 ft. lbs. |
|
Fig. 1 A/C compressor hoses & seal removal
Fig. 2 Exploded view of compressor replacement
1.
Evacuate system as outlined under "Refrigerant
Recovery" in "General Service" on main menu selection.
2.
Remove hi ...
See also:
Chevrolet Cobalt Owners Manual. Electronic Stability Control (ESC)
The vehicle may have an Electronic Stability Control
(ESC) system which combines antilock brake, and
traction and stability control systems that help the driver
maintain directional control of the vehicle in most driving
conditions.
When the vehicle is started and begins to move, the
system pe ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual