Chevrolet Cobalt Service & Repair Manual: Rear Bumper Fascia
Removal
1. |
Remove tail lamps and side marker lamps. |
3. |
Remove rear wheel liners as outlined
in Rear Wheelhouse Panel Liner. |
4. |
Remove rear bumper fascia upper retainers
(1), Fig. 1. |
5. |
Remove rear bumper fascia tail lamp
pocket screw (2). |
6. |
Remove rear bumper fascia bolts inside
wheelwells (3). |
7. |
Remove rear bumper fascia retainers
(4). |
8. |
Pull sides of rear fascia (5) at quarter
panel to release fascia from brackets and remove. |
|
Installation
1. |
Carefully position rear fascia (5)
to vehicle ensuring that fascia is seated in brackets on quarter
panels, Fig. 2. |
2. |
Install rear bumper lower fascia retainers
(4). |
3. |
Install bolts to fascia inside wheelwell
(3). Torque to 22 inch lbs. |
4. |
Install rear bumper fascia tail lamp
pocket screws (2). |
5. |
Install rear bumper fascia upper retainers
(1). |
6. |
Install rear wheel liners as outlined
in Rear Bumper Fascia. |
8. |
Install tail lamps and side marker
lamps. |
|
Fig. 1 Rear bumper fascia
Fig. 2 Rear bumper fascia installation
Removal
1.
Remove panels and components.
2.
Remove rearview outside mirror nuts
(1), Fig. 1.
3.
Disconnect ...
Removal
1.
Remove rear bumper fascia as outlined
in Rear Bumper Fascia.
2.
Remove rear bumper fascia side bracket
bolts (1), Fig. ...
See also:
Chevrolet Cobalt Owners Manual. Windshield and Wiper Blades
Clean the outside of the windshield with glass cleaner.
Clean the rubber blades using a lint free cloth or paper
towel soaked with windshield washer fluid or a mild
detergent. Wash the windshield thoroughly when
cleaning the blades. Bugs, road grime, sap, and a
buildup of vehicle wash/wax treat ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual