Chevrolet Cobalt Service & Repair Manual: Radiator Fan Shroud R&R

1. Disconnect the cooling fan electrical connector.
2. Remove the cooling fan wire from the fan shroud, Fig. 1.
3. Raise and support the vehicle.
4. Remove the cooling fan assembly from the radiator by pushing up on the fan shroud to unsnap the retaining features. Position the cooling fan assembly away from the radiator, Fig. 2.
5. Remove the air dam push-in retainers.
6. Remove the right and left engine splash shield to radiator mount push-in retainers, Fig. 3.
7. Remove the lower radiator mount, brackets, bolts, and lower air dam. Support the radiator and condenser, Fig. 4.
8. Tilt the radiator and condenser forward in the vehicle, then remove the cooling fan assembly from the vehicle.
9. Reverse procedure to install. Torque lower radiator mounts, brackets and bolts to 18 ft. lbs.

Fig. 1 Cooling fan wire replacement

Fig. 2 Cooling fan shroud replacement

Fig. 3 Engine splash shield replacement

Fig. 4 Lower radiator mount bracket and lower air dam replacement

    Heater Hose, Replace
    Inlet 1. Drain coolant into a suitable container. 2. Loosen hose clamp connecting hose to heater core inlet tube. ...

    Radiator, Replace
    1. Drain cooling system into a suitable container. 2. Remove air cleaner outlet resonator. 3. Reposition rad ...

    See also:

    Chevrolet Cobalt Owners Manual. Setting the Clock
    Without Date Display AM/FM Base Radio with a Single CD Player To set the time: 1. Turn the ignition key to ACC/ACCESSORY or ON/RUN. Press O to turn the radio on. 2. Press until the hour begins flashing on the display. Press a second time and the minute begins flashing on the display. ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0041