Chevrolet Cobalt Service & Repair Manual: CV Joint Boot R&R
1. |
Remove the wheel drive shaft from the
vehicle. |
2. |
Install the wheel drive shaft (2) into
a vise, Fig. 1 |
3. |
Using a hand grinder, remove and discard
the inner (4) and outer (2) boot clamps, Fig. 2. |
4. |
Separate the CV joint boot from the
CV joint race (2) at the large diameter, Fig. 3. |
5. |
Slide the boot away from the joint
along the wheel drive shaft. |
6. |
Reverse procedure to install. |
|
Fig. 1 Wheel drive shaft replacement
Fig. 2 Inner and outer boot clamp replacement
Fig. 3 CV joint boot and joint race separation
Refer to Fig. 1
when performing the following procedure.
1.
Raise and support the vehicle.
2.
Remove the rear tires and wheels ...
1.
Remove the wheel drive shaft from the
vehicle.
2.
Install the wheel drive shaft (2) into
a vise, Fig. 1
3 ...
See also:
Chevrolet Cobalt Owners Manual. Power Windows
WARNING:
Leaving children in a vehicle with the keys is
dangerous for many reasons, children or others
could be badly injured or even killed. They could
operate the power windows or other controls or
even make the vehicle move. The windows will
function and they could be seriously injured or
...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual