Chevrolet Cobalt Service & Repair Manual: Headlamp Bulb, Replace
| Warning: Halogen bulbs contain
gas under pressure. Handling a bulb improperly could cause it to shatter
into flying glass fragments. To help avoid personal injury: Turn off the
lamp switch and allow the bulb to cool before changing the bulb. Leave the
lamp switch OFF until the bulb change is complete. Always wear eye protection
when changing a halogen bulb. Handle the bulb only by its base. Avoid touching
the glass. Keep dirt and moisture off the bulb. Properly dispose of the
used bulb. Keep halogen bulbs out of the reach of children. |
| Caution: Avoid touching the
bulb or letting the bulb come in contact with anything damp. Oil from your
skin or moisture on the bulb can cause the bulb to explode when the bulb
is turned on. If either comes in contact with the bulb, clean the bulb with
alcohol or a suitable degreaser and wipe the bulb dry. |
| 1. |
Remove headlamp assembly, if required. |
| 2. |
Turn headlamp bulb locking ring (1)
counterclockwise and remove ring, Fig. 1. |
| 3. |
Rotate bulb socket (2) counterclockwise
and remove headlamp bulb, Fig. 1. |
| 4. |
Reverse procedure to install. |
|
Fig. 1 Headlamp bulb removal
Visual Aim
Headlamp aim should be inspected
when a new headlamp capsule is installed, or if service or repairs to the
front end area have, or may have, disturbed the headlamps or their ...
Refer to "Multi-Function Switch,
Replace" for replacement procedure.
...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Headlamp Alignment, Adjust
Headlamp Switch, Replace