Chevrolet Cobalt Service & Repair Manual: Tail Lamp Bulb, Replace

Coupe

1. Remove tail lamp.
2. Pull stop, tail and turn signal bulb (1) straight from socket to remove, Fig. 1.
3. Reverse procedure to install.

Sedan

1. Remove tail lamp.
2. Rotate tail lamp bulb harness (1) sockets counterclockwise and remove from lamp housing, Fig. 2.
3. Pull stop, tail and turn signal lamp bulb (3) straight from socket to remove, Fig. 2.
4. Reverse procedure to install.

Fig. 1 Tail lamp bulb removal. Coupe

Fig. 2 Tail lamp bulb removal. Sedan

    Rear Turn Signal Lamp Bulb, Replace
    Coupe Warning: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury: Turn off the ...

    Tire Pressure Monitor Lamp, Diagnosis
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. The Body Control Module (BC ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Fog Lamp Bulb, Replace
    Warning: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury: Turn off the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch OFF until the ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0036