Chevrolet Cobalt Service & Repair Manual: Starter, Replace

Chevrolet Cobalt Service & Repair Manual / Electrical / Starter & Alternator / Starter, Replace

1. Disconnect battery ground cable from battery.
2. Raise and support vehicle.
3. Remove starter solenoid terminal nut.
4. Remove positive battery cable terminal from starter.
5. Remove starter solenoid wire terminal from starter.
6. Disconnect engine harness connector from starter.
7. Remove starter motor mounting bolts.
8. Remove starter from vehicle.
9. Reverse procedure to install, noting the following:
  a. Torque starter mounting bolts to 30 ft. lbs.
  b. Torque starter solenoid terminal nut to 13 ft. lbs.
    Alternator, Replace
    1. Disconnect battery ground cable from battery. 2. Remove accessory drive belt. 3. Remove engine harness al ...

    Electronic Stability Controls
    ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Suspension System, Inspection
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. 1. Inspect tire pressures with all normal loads in vehicle and tires cold. Refer to vehicle certific ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0033