Chevrolet Cobalt Service & Repair Manual: Intake Manifold Bolts Re-Torque
Refer to Fig. 1
when performing the following procedure. |
1. |
Install the intake manifold bolts and
nuts finger tighten. |
2. |
Torque the intake manifold bolts
and nuts in sequence to 89 inch lbs. |
|
Fig. 1 Intake manifold torque specification
Removal
1.
Relieve fuel system pressure as outlined
under "Precautions."
2.
Drain fuel tank.
3.
R ...
1.
Remove the intake manifold cover.
2.
Remove the air cleaner outlet duct.
3.
Disconnect the engine harness elect ...
See also:
Chevrolet Cobalt Owners Manual. Shifting Out of Park (Automatic Transmission)
This vehicle is equipped with an electronic shift lock
release system. The shift lock release is designed to:
- Prevent ignition key removal unless the shift lever
is in P (Park) with the shift lever button fully
released, and
- Prevent movement of the shift lever out of
P (Park) unless the ig ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual