Chevrolet Cobalt Service & Repair Manual: Wheel Bearing, Replace

Chevrolet Cobalt Service & Repair Manual / Steering & Suspension / Wheel Bearing, Replace

Front

1. Raise and support vehicle using suitable lift.
2. Remove tire and wheel assemblies.
3. Remove drive axle nut, Fig. 1.
4. Remove brake caliper and rotor assembly.
5. Remove hub and bearing assembly, Figs. 2 and 3.
6. Reverse procedure to install.

Fig. 1 Drive axle nut removal

Fig. 2 Hub & bearing assembly removal

Fig. 3 Hub & bearing assembly removal. Cobalt & G5

    Vibration, Diagnosis
    The designs and engineering requirements of vehicles have undergone drastic changes over the last several years. Vehicles are stiffer and provide more isolation from road input than the ...

    Wheel Hub & Bearing, Replace
    Rear Disc Brakes 1. Raise and support vehicle, then the tire and wheel assembly. 2. Without disconnecting the hydraulic brake fle ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Tire Pressure Monitor Lamp, Diagnosis
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. The Body Control Module (BCM) receives a Radio Frequency (RF) transmission from each tire pressure sensor. Each sensor ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0033