Chevrolet Cobalt Service & Repair Manual: Rotor Replace
Cobalt & Malibu
| 1. |
Raise and support vehicle, then remove
tire and wheel assembly. |
| 2. |
Compress piston into caliper bore using
suitable C-clamp to allow caliper pivot upward from brake pads. |
| 3. |
Install and tighten two wheel nuts
opposite to retain rotor to hub. |
| 4. |
Remove guide pin bolts, caliper and
bracket. |
| 5. |
Mark rotor to wheel studs for installation
alignment and remove rotor. |
| 6. |
Reverse procedure to install. |
|
Camaro
| 1. |
Raise and support vehicle. |
| 2. |
Remove tire and wheel assembly. |
| 3. |
Remove and discard disc brake caliper
bracket bolts.Disc brake caliper bracket bolts must be replaced
any time they are removed. Do not reuse disc brake caliper bracket
bolts. |
| 4. |
Remove disc brake caliper and bracket
assembly and support with heavy mechanics wire or equivalent. |
| 5. |
Remove disc brake rotor bolt. |
| 6. |
Remove disc brake rotor. |
| 7. |
Reverse procedure to install. |
|
Parking Brake Equalizer Cable, Replace
1.
Remove center console.
2.
Remove adjuster nut and cables from
equalizer, Fig. 1.
...
Year
Component
Torque Ft. Lbs.
CAMARO
2010
Brake Rotor Bolt
89 1
Calip ...
See also:
Chevrolet Cobalt Owners Manual. Interior Cleaning
The vehicle's interior will continue to look its best if
it is cleaned often. Although not always visible, dust
and dirt can accumulate on the upholstery. Dirt can
damage carpet, fabric, leather, and plastic surfaces.
Regular vacuuming is recommended to remove
particles from the upholstery. It ...
Parking Brake Service
Tightening Specifications