Chevrolet Cobalt Service & Repair Manual: CV Joint Boot R&R
1. |
Remove the wheel drive shaft from the
vehicle. |
2. |
Install the wheel drive shaft (2) into
a vise, Fig. 1 |
3. |
Using a hand grinder, remove and discard
the inner (4) and outer (2) boot clamps, Fig. 2. |
4. |
Separate the CV joint boot from the
CV joint race (2) at the large diameter, Fig. 3. |
5. |
Slide the boot away from the joint
along the wheel drive shaft. |
6. |
Reverse procedure to install. |
|
Fig. 1 Wheel drive shaft replacement
Fig. 2 Inner and outer boot clamp replacement
Fig. 3 CV joint boot and joint race separation
Refer to Fig. 1
when performing the following procedure.
1.
Raise and support the vehicle.
2.
Remove the rear tires and wheels ...
1.
Remove the wheel drive shaft from the
vehicle.
2.
Install the wheel drive shaft (2) into
a vise, Fig. 1
3 ...
See also:
Chevrolet Cobalt Owners Manual. Fuel Gauge
The fuel gauge shows
about how much fuel the
vehicle has left.
An arrow on the fuel gauge indicates the side of the
vehicle the fuel door is on.
Here are four things that some owners ask about.
None of these show a problem with the fuel gauge:
- At the service station, the gas pump shuts of ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual