Chevrolet Cobalt Service & Repair Manual: Back-Up Lamp Bulb, Replace

Coupe

Warning: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury: Turn off the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch OFF until the bulb change is complete. Always wear eye protection when changing a halogen bulb. Handle the bulb only by its base. Avoid touching the glass. Keep dirt and moisture off the bulb. Properly dispose of the used bulb. Keep halogen bulbs out of the reach of children.
Caution: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.
1. Open rear compartment lid.
2. Remove back-up lamp cover.
3. Turn bulb socket counterclockwise and remove from lamp housing, Fig. 1.
4. Pull back-up bulb (1) straight from lamp socket connector to remove, Fig. 1.
5. Reverse procedure to install.

Sedan

Warning: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury: Turn off the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch OFF until the bulb change is complete. Always wear eye protection when changing a halogen bulb. Handle the bulb only by its base. Avoid touching the glass. Keep dirt and moisture off the bulb. Properly dispose of the used bulb. Keep halogen bulbs out of the reach of children.
Caution: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.
1. Remove tail lamp assembly.
2. Twist and remove back-up lamp bulb socket (1) from tail lamp assembly, Fig. 2.
3. Remove back-up lamp bulb (2), Fig. 2.
4. Reverse procedure to install.

Fig. 1 Back-up lamp bulb removal. Coupe

Fig. 2 Back-up lamp bulb removal. Sedan

    Component Replacement
    ...

    Blower Motor, Replace
    1. Disconnect blower motor electrical connectors. 2. Remove sound insulator panels as required. 3. Remove mo ...

    See also:

    Chevrolet Cobalt Owners Manual. Older Children
    Older children who have outgrown booster seats should wear the vehicle's safety belts. The manufacturer's instructions that come with the booster seat state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below fit tes ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0036