Chevrolet Cobalt Service & Repair Manual: Alternator, Replace
| 1. |
Disconnect battery ground cable from
battery. |
| 2. |
Remove accessory drive belt. |
| 3. |
Remove engine harness alternator connector. |
| 4. |
Remove engine harness terminal boot. |
| 5. |
Remove alternator terminal nut. |
| 6. |
Remove alternator retaining bolts and
nuts. |
| 7. |
Remove alternator from vehicle. |
| 8. |
Reverse procedure to install, noting
the following: |
| |
a. |
Torque alternator B+ terminal
nut to 15 ft. lbs. |
| |
b. |
Torque alternator mounting bolt
to 16 ft. lbs. |
|
Caution: Wear suitable eye
protection and heavy leather gloves when removing and installing pulley.
Do not remove or install pulley
with alternator in upright position.
...
1.
Disconnect battery ground cable from
battery.
2.
Raise and support vehicle.
3.
Remove starter solenoid te ...
See also:
Chevrolet Cobalt Owners Manual. Electronic Stability Control (ESC)
The vehicle may have an Electronic Stability Control
(ESC) system which combines antilock brake, and
traction and stability control systems that help the driver
maintain directional control of the vehicle in most driving
conditions.
When the vehicle is started and begins to move, the
system pe ...
Alternator Pulley, Replace
Starter, Replace