Chevrolet Cobalt Service & Repair Manual: Starter, Replace

Chevrolet Cobalt Service & Repair Manual / Electrical / Starter & Alternator / Starter, Replace

1. Disconnect battery ground cable from battery.
2. Raise and support vehicle.
3. Remove starter solenoid terminal nut.
4. Remove positive battery cable terminal from starter.
5. Remove starter solenoid wire terminal from starter.
6. Disconnect engine harness connector from starter.
7. Remove starter motor mounting bolts.
8. Remove starter from vehicle.
9. Reverse procedure to install, noting the following:
  a. Torque starter mounting bolts to 30 ft. lbs.
  b. Torque starter solenoid terminal nut to 13 ft. lbs.
    Alternator, Replace
    1. Disconnect battery ground cable from battery. 2. Remove accessory drive belt. 3. Remove engine harness al ...

    Electronic Stability Controls
    ...

    See also:

    Chevrolet Cobalt Owners Manual. Cruise Control
    With cruise control, a speed of about 40 km/h (25 mph) or more can be maintained without keeping your foot on the accelerator. Cruise control does not work at speeds below 40 km/h (25 mph). The brake must be applied at least one time, after the vehicle has been started, before cruise control wi ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0038