Chevrolet Cobalt Service & Repair Manual: Electronic Stability Controls

Starter, Replace

1. Disconnect battery ground cable from battery. 2. Raise and support vehicle. 3. Remove starter solenoid te ...

Component Replacement

Anti-Lock Brake System Automated Bleed Procedure 1. Raise and support vehicle. 2. Remove all four wheel and tire assemblies. ...

See also:

Chevrolet Cobalt Service & Repair Manual. Intake Manifold Bolts Re-Torque
Refer to Fig. 1 when performing the following procedure. 1. Install the intake manifold bolts and nuts finger tighten. 2. Torque the intake manifold bolts and nuts in sequence to 89 inch lbs. F ...