When inspecting cylinder compression, the engine should be at room temperature, the throttle should be open, the spark plugs removed and the battery at full charge. The lowest reading cylinder should not be less than 70% of the highest and no cylinder reading should be less than 100 psi. Turn ignition key until engine cranks through four compression cycles per cylinder. Normal compression builds up quickly and evenly to specified compression on each cylinder. |
Chevrolet Cobalt Service & Repair Manual. Stabilizer Bushing R&R
Refer to Fig. 1
when performing the following procedure.
1.
Raise and support the vehicle.
2.
Remove front stabilizer shaft clamp
bolt.
3.
Remove front stabilizer shaft clamp
nut.
...