Chevrolet Cobalt Service & Repair Manual: Crankshaft Seal R&R

Chevrolet Cobalt Service & Repair Manual / Engine Service / Crankshaft Seal R&R

Removal

1. Raise and support vehicle.
2. Remove front tire and wheel assembly.
3. Remove front fender liner.
4. Turn drive belt tensioner clockwise.
5. Remove serpentine drive belt.
6. Prevent crankshaft from rotating by install harmonic balancer holder tool No. J38122A, or equivalent.
7. Remove mounting bolt and crankshaft balancer. Discard bolt.
8. Remove front oil seal using suitable flat bladed tool.
9. Reverse procedure to install, using camshaft front main seal installer tool No. J35268A, or equivalent.
    Crankshaft Rear Oil Seal R&R
    Removal 1. Remove transaxle. 2. Remove flywheel or flexplate. 3. Remove crankshaft rear oil seal using suit ...

    Cylinder Head Overhaul
    It is usually recommended to send head to machine shop for complete overhaul. Cylinder head must be cool before removing it from engine. Cylinder head warpage can result if ...

    See also:

    Chevrolet Cobalt Owners Manual. Sunroof
    On vehicles with a sunroof, the switch that operates it is located on the headliner between the map lamps. The sunroof will only operate while the ignition is on, or turned to ACC/ACCESSORY, or if Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP). Press the sunr ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037