Chevrolet Cobalt Service & Repair Manual: Engine Oil Pump Pickup R&R
On some models oil pump pickup
can not be removed from pump. Pickup must be replaced with oil pump as a
unit. |
It is recommended to change oil
filter when replacing oil pump pickup. |
1. |
Lift and support vehicle using a suitable
lift. |
2. |
Drain engine oil from oil pan. |
3. |
Remove oil pan from engine. |
4. |
Remove any pickup support bracket fasteners
if equipped. |
5. |
Remove pickup mounting fasteners to
oil pump. |
6. |
Remove oil pump pickup from pump. |
7. |
Reverse procedure to install, note
following: |
|
a. |
Fill engine oil to specified level. |
|
b. |
Run engine at idle for approximately
30 seconds and turn OFF. |
|
c. |
Ensure engine oil is still at specified
level. |
|
1.
Install the engine support fixture.
2.
Remove the engine mount.
3.
Raise the engine enough to allow clearance
...
Cylinder Head, Valve Guide, & Valve Seat
All Measurements Given In Inches
Unless Otherwise Specified
Engine (VIN) 1
Year
Cylind ...
See also:
Chevrolet Cobalt Owners Manual. How to Wear Safety Belts Properly
This section is only for people of adult size.
Be aware that there are special things to know about
safety belts and children. And there are different rules
for smaller children and infants. If a child will be riding in
the vehicle, see Older Children or Infants
and Young Children. Follow those ...