Chevrolet Cobalt Service & Repair Manual: Intake Manifold Bolts Re-Torque

Chevrolet Cobalt Service & Repair Manual / Engine Service / Intake Manifold Bolts Re-Torque

Refer to Fig. 1 when performing the following procedure.
1. Install the intake manifold bolts and nuts finger tighten.
2. Torque the intake manifold bolts and nuts in sequence to 89 inch lbs.

Fig. 1 Intake manifold torque specification

    Fuel Pump, Replace
    Removal 1. Relieve fuel system pressure as outlined under "Precautions." 2. Drain fuel tank. 3. R ...

    Intake Manifold Gasket R&R
    1. Remove the intake manifold cover. 2. Remove the air cleaner outlet duct. 3. Disconnect the engine harness elect ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Oil Pump, Replace
    Removal 1. Raise and support vehicle. 2. Drain engine oil into suitable container. 3. Remove engine mount strut bracket. 4. Remove front fender liner. 5. T ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0032