Chevrolet Cobalt Service & Repair Manual: Intake Manifold, Replace

Removal

1. Remove air inlet duct and resonator.
2. Disconnect IAC, TPS and MAP sensor.
3. Disconnect EVAP and PCV hose.
4. Disconnect purge solenoid tube and brake booster hose.
5. Remove oil dipstick tube bolt.
6. Disconnect accelerator and cruise control cables.
7. Remove throttle body and fuel rail.
8. Remove KS connector from intake manifold.
9. Remove mounting nuts, bolts and intake manifold.
10. Reverse procedure to install.
    Intake Manifold Gasket R&R
    1. Remove the intake manifold cover. 2. Remove the air cleaner outlet duct. 3. Disconnect the engine harness elect ...

    Oil Pan, Replace
    Removal 1. Raise and support vehicle. 2. Drain engine oil into suitable container. 3. Remove engine mount strut b ...

    See also:

    Chevrolet Cobalt Owners Manual. Seat Adjustment
    Manual Seats 1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar. Try to move the seat to be sure it is locked in place. See Manual Seats. Seat Height Adjuster To raise or lower the driver seat, move the lever upward or downward repeatedly ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0032