Chevrolet Cobalt Service & Repair Manual: Oil Pan, Replace

Chevrolet Cobalt Service & Repair Manual / Engine Service / Oil Pan, Replace

Removal

1. Raise and support vehicle.
2. Drain engine oil into suitable container.
3. Remove engine mount strut bracket.
4. Remove front fender liner.
5. Turn drive belt tensioner clockwise.
6. Remove serpentine drive belt.
7. Remove lower air conditioning compressor bolts.
8. Loosen upper air conditioning compressor bolts.
9. Remove oil pan bolts in sequence, Fig. 1.
10. Remove oil pan.
11. Reverse procedure to install. Torque oil pan mounting bolts to 18 ft. lbs., in reverse of loosening sequence, Fig. 1.

Fig. 1 Oil pan bolt loosening sequence

    Intake Manifold, Replace
    Removal 1. Remove air inlet duct and resonator. 2. Disconnect IAC, TPS and MAP sensor. 3. Disconnect EVAP and PCV ...

    Oil Pump, Replace
    Removal 1. Raise and support vehicle. 2. Drain engine oil into suitable container. 3. Remove engine mount strut b ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Stabilizer Bar Link Kit R&R
    Refer to Fig. 1 when performing the following procedure. 1. Raise and support the vehicle. 2. Remove the front tire and wheel assembly. 3. Remove front stabilizer shaft link nut to strut. ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0032