Chevrolet Cobalt Service & Repair Manual: Tightening Specifications

Chevrolet Cobalt Service & Repair Manual / Engine Service / Tightening Specifications

Year Component Torque, Ft. Lbs.
2009-10 Accelerator & Cruise Control Cable 89 2
Air Cleaner Clamps 44 2
Air Cleaner Outlet Resonator Mounting Bolt 89 2
Alternator 15
Engine Mount Strut 74 1
Engine To Transmission Bolts 55
Power Steering Pump 19
Radiator Drain Cock 18 2
Righthand Engine Mount Bolts 44 1
Righthand Engine Mount To Body Nuts 55
Torque Converter Bolts 46
Upper Air Cleaner Cover Screws 27 2
 
 1 --Plus 90°.
 2 --Inch lbs.
 
    Precautions
    Battery Ground Cable Prior to service, disconnect battery ground cable and isolate as required. Fuel System Pressure Relief 1. Disconnect battery ground ...

    Valve Cover Gasket R&R
    1. Remove the intake manifold cover. 2. Remove the air cleaner outlet duct. 3. Disconnect the intake (3) and exhau ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Engine, Replace
    Removal 1. Open and support hood. Install suitable protective covering over fenders. Mark upper hood hinge location to hood with suitable grease pencil. Remove hood with assistance. 2. Remove air cleaner resonator to accelerator ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0031