Chevrolet Cobalt Service & Repair Manual: Catalytic Converter R&R

Chevrolet Cobalt Service & Repair Manual / Exhaust / Catalytic Converter R&R

1. Raise and support vehicle.
2. Remove wheel drive shaft heat shield.
3. Remove Heated Oxygen Sensor (HO2S).
4. Remove catalytic converter to resonator pipe nuts, Fig. 1.
5. Remove catalytic converter to exhaust manifold nuts, Fig. 2.
6. Remove catalytic converter, Fig. 2.
7. Discard exhaust gaskets.
8. Clean flange mating surfaces of any remaining gasket material.
9. Reverse procedure to install, noting following:
  a. Install a NEW gasket onto exhaust manifold studs.
  b. Torque catalytic converter nuts to 37 ft. lbs.
  c. Install a NEW gasket onto resonator pipe studs.
  d. Torque catalytic converter to resonator pipe nuts to 22 ft. lbs.

Fig. 1

Fig. 2

    Exhaust
    ...

    Exhaust Muffler, Replace
    Warning: Exhaust system operates at high temperatures. Allow system to cool before servicing or burns or personal injury may result. Caution: Do not use oil or grease-b ...

    See also:

    Chevrolet Cobalt Owners Manual. Tire Sealant and Compressor Kit
    WARNING: Idling a vehicle in an enclosed area with poor ventilation is dangerous. Engine exhaust may enter the vehicle. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. Never run the engine in an enclosed area that has ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0039