Chevrolet Cobalt Service & Repair Manual: Exhaust Tail Pipe, Replace

Chevrolet Cobalt Service & Repair Manual / Exhaust / Exhaust Tail Pipe, Replace

Warning: Exhaust system operates at high temperatures. Allow system to cool before servicing or burns or personal injury may result.

Do not use oil or grease-based lubricants on isolators. These lubricants may cause deterioration of rubber. This can lead to separation of isolator from exhaust hanger bracket during vehicle operation.

1.	If equipped, remove applicable splash shields.

2.	Support tailpipe with a suitable jack stand.

3.	Remove muffler clamp or cut tailpipe, as required.

4.	Remove tailpipe/muffler isolators as required.

5.	Remove tailpipe assembly from vehicle.

6.	Reverse procedure to install. Inspect to see if exhaust system isolators are at zero load, if exhaust system isolators are not at zero load, re-align exhaust system.

Exhaust System Complete, Replace

Removal Warning: Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury. Caution: Do not over flex or ...

Interior Panels

...

Chevrolet Cobalt Service & Repair Manual: Exhaust Tail Pipe, Replace

Exhaust System Complete, Replace

Interior Panels

See also:

Chevrolet Cobalt Owners Manual

Chevrolet Cobalt Service Manual