Chevrolet Cobalt Service & Repair Manual: Engine Oil Filter R & R

1. Raise and support the vehicle.
2. Place a drain pan under the oil drain plug.
3. Remove the oil pan drain plug.
4. Allow the oil to drain completely.
5. Install the oil pan drain plug.
6. Use tool No. J-44887 to loosen the oil filter cap, Fig. 1.
7. Remove the oil filter cap and filter.
8. Remove the oil filter from the oil filter cap, Fig. 2.
9. Inspect the oil filter cap O-ring seal for damage, replace as necessary.
10. Reverse procedure to install, noting the following:
  a. Torque the plug to 18 ft. lbs.
  b. Torque oil filter cap to 18 ft. lbs.

Fig. 1 Oil filter cap replacement

Fig. 2 Oil filter replacement

    Battery Cable, Replace
    Ground Cable Battery To Battery Tray Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before ...

    Lube, Oil & Filter, Replace
    Caution: Prolonged and repeated contact with engine oil and grease will result in removal of natural oils from skin, leading to dryness, irritation and dermatitis. In addition, used ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Steering Gear, Replace
    1. Ensure front wheels are in straight ahead position, then secure steering wheel to prevent rotation. 2. Raise and support vehicle, then remove wheel and tire assemblies. 3. Remove steering gear to int ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual

    Copyright © 2023 - Chevrolet Auto Manuals - 0.0034