Chevrolet Cobalt Service & Repair Manual: Power Steering System Drain & Refill
| 1. |
Remove power steering reservoir and
disconnect return hose. |
| 2. |
Start engine and drain fluid into a
suitable container. |
| 3. |
Install hose and reservoir. |
| 4. |
Fill reservoir to full line. |
| 5. |
Start engine and top off reservoir. |
| 6. |
Turn steering wheel from lock to lock
to bleed air from system. |
| 7. |
Top off fluid, as required. |
|
A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern.
A noise produced by a vibra ...
Most modern cars come equipped
with hydraulic power steering, as systems age they can wear out. Power steering
fluid leaks (depending on severity) will cause the power steering system
...
See also:
Chevrolet Cobalt Service & Repair Manual. Pinpoint Test
Ensure battery voltage is greater
than 12 volts prior to and during pinpoint test.
Caution: Do not have a battery
charger attached during vehicle testing.
Warning: Never use electrical
test equipment on any circuit related to the SRS unless instructed by ...
Noise, Diagnosis
Power Steering System Leak, Inspection