Chevrolet Cobalt Service & Repair Manual: Stabilizer Bushing R&R
Refer to Fig. 1
when performing the following procedure. |
1. |
Raise and support the vehicle. |
2. |
Remove front stabilizer shaft clamp
bolt. |
3. |
Remove front stabilizer shaft clamp
nut. |
4. |
Remove front stabilizer shaft clamp. |
5. |
Remove front stabilizer shaft insulator. |
6. |
Reverse procedure to install. Torque
front stabilizer shaft clamp nut and bolt to 37 ft. lbs. |
|
Fig. 1 Stabilizer shaft insulator replacement
Front
1.
Raise and support vehicle, then remove
tire and wheel assemblies.
2.
Remove rear transaxle mount.
3.
...
1.
Ensure front wheels are in straight
ahead position, then secure steering wheel to prevent rotation.
2.
Raise and support vehicle, then ...
See also:
Chevrolet Cobalt Owners Manual. Trunk
To release the trunk lid from the outside, use the key or
the Remote Keyless Entry (RKE) transmitter,
if equipped.
WARNING:
Exhaust gases can enter the vehicle if it is driven
with the liftgate, trunk/hatch open, or with any
objects that pass through the seal between the
body and the trunk/ha ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual