Chevrolet Cobalt Service & Repair Manual: Radio, Replace
| 1. |
Remove accessory trim panel and disconnect
electrical connectors. |
| 2. |
Remove mounting screws and pull radio
out. |
| 3. |
Disconnect radio electrical connectors
and remove radio. |
| 4. |
Reverse procedure to install. |
|
Ensure battery voltage is greater
than 12 volts prior to and during pinpoint test.
Caution: Do not have a battery
charger attached during vehicle testing.
Warn ...
1.
Remove reading lamp lens (1) from lamp,
Fig. 1.
2.
Remove bulb (2) from reading lamp,
Fig. 1.
3.
Reve ...
See also:
Chevrolet Cobalt Service & Repair Manual. Battery Cable, Replace
Ground Cable
Battery To Battery Tray
Caution: Unless directed otherwise,
the ignition and start switch must be in the OFF or LOCK position, and all
electrical loads must be OFF before servicing any electrical component.
Disconnect the battery ground to prevent an electrical spar ...
Pinpoint Test
Reading Lamp Bulb, Replace