Chevrolet Cobalt Service & Repair Manual: Intake Manifold Bolts Re-Torque

Refer to Fig. 1 when performing the following procedure.

1.	Install the intake manifold bolts and nuts finger tighten.

2.	Torque the intake manifold bolts and nuts in sequence to 89 inch lbs.

Fig. 1 Intake manifold torque specification

Removal 1. Relieve fuel system pressure as outlined under "Precautions." 2. Drain fuel tank. 3. R ...

1. Remove the intake manifold cover. 2. Remove the air cleaner outlet duct. 3. Disconnect the engine harness elect ...

Chevrolet Cobalt Owners Manual