Chevrolet Cobalt Service & Repair Manual: Oil Pump, Replace

Chevrolet Cobalt Service & Repair Manual / Engine Service / Oil Pump, Replace

Removal

1. Raise and support vehicle.
2. Drain engine oil into suitable container.
3. Remove engine mount strut bracket.
4. Remove front fender liner.
5. Turn drive belt tensioner clockwise.
6. Remove serpentine drive belt.
7. Remove lower air conditioning compressor bolts.
8. Loosen upper air conditioning compressor bolts.
9. Remove oil pan bolts in sequence, Fig. 1.
10. Remove oil pan.
11. Remove oil pump and drive shaft extension, Fig. 2.
12. Reverse procedure to install.

Fig. 1 Oil pan bolt loosening sequence

Fig. 2 Oil pump replacement

    Oil Pan, Replace
    Removal 1. Raise and support vehicle. 2. Drain engine oil into suitable container. 3. Remove engine mount strut b ...

    Powertrain Drivability Diagnosis & Testing
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. Detailed information from t ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Axle Shaft R&R
    Refer to Fig. 1 when performing the following procedure. 1. Raise and support the vehicle. 2. Remove the rear tires and wheels. 3. Disconnect the rear brake pipes and the hoses from the rear ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0035