Chevrolet Cobalt Owners Manual: Tire Sealant and Compressor Kit Storage
Chevrolet Cobalt Owners Manual / Service and Appearance Care / Tire Sealant and Compressor Kit Storage
The tire sealant and compressor kit is located in the trunk.
1. Open the trunk. See Trunk.
2. Lift the trunk liner.
3. Remove the retainer that holds the tire sealant and compressor kit.
4. Remove the kit from the foam container.
To store the tire sealant and compressor kit, reverse the steps.
Tire Sealant and Compressor Kit
WARNING:
Idling a vehicle in an enclosed area with poor
ventilation is dangerous. Engine exhaust may
enter the vehicle. Engine exhaust contains
Carbon Monoxide (CO) which cannot be seen
or smelle ...
Changing a Flat Tire
If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place. Turn on the hazard
warning flashers. See Hazard Warning Flashers.
WARNING:
Changing a tire can be dange ...
See also:
Chevrolet Cobalt Service & Repair Manual. Relearn
Initialization Sequence
The EBCM performs one initialization
test each ignition cycle. The initialization of the EBCM occurs when the
EBCM detects the there is a minimum of 500 RPM from the ECM by means of
a serial data message and the stop lamp switch is not applied. The initial ...
Chevrolet Cobalt Owners Manual
- In Brief
- Seats and Restraint System
- Features and Controls
- Instrument Panel
- Driving Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
Chevrolet Cobalt Service Manual
- Air Bags
- Air Conditioning & Heater
- Body & Frame
- Brakes
- Cooling System
- Driveline
- Electrical
- Electronic Stability Controls
- Engine Service
Copyright © 2024 www.cheviguide.com - Chevrolet Auto Manuals - 0.0038