Chevrolet Cobalt Service & Repair Manual: Precautions

Battery Ground Cable

Prior to service, disconnect battery ground cable and isolate as required.

Fuel System Pressure Relief

1. Disconnect battery ground cable, isolate as required.
2. Install fuel pressure gauge tool No. J34730-1A, or equivalent.
3. Install bleed hose into suitable container, then open valve to bleed system pressure.
4. Disconnect fuel pressure gauge from fuel pressure connection.
    Powertrain Drivability Diagnosis & Testing
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. Detailed information from t ...

    Tightening Specifications
    Year Component Torque, Ft. Lbs. 2009-10 Accelerator & Cruise Control Cable 89 2 A ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Stabilizer Bar Link Kit R&R
    Refer to Fig. 1 when performing the following procedure. 1. Raise and support the vehicle. 2. Remove the front tire and wheel assembly. 3. Remove front stabilizer shaft link nut to strut. ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.2812