With this feature the engine can be started from outside of the vehicle.
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press .
3. Immediately after completing Step 2, press and
hold until the turn signal
lamps flash.
When the vehicle starts, the parking lamps will turn on and remain on as long as the engine is running.
The doors will be locked and the climate control system may come on.
The engine will continue to run for 10 minutes. Repeat the steps for a 10-minute time extension. Remote start can be extended only once.
Canceling a Remote Start
To cancel a remote start:
- Aim the RKE transmitter at the vehicle and press
and hold until the parking
lamps turn off.
- Turn on the hazard warning flashers.
- Turn the ignition on and then back off.
See Remote Vehicle Start.
Chevrolet Cobalt Owners Manual. Reconfigurable Performance Display (RPD)
For vehicles with the RPD, the screen displays
information that can be used to monitor vehicle
performance. The RPD knob located next to the
screen is used to configure the display and select
information to be viewed.
A short video plays whenever the ignition key is turned
on. Press the RPD kn ...