The engine oil life system calculates engine oil life based on vehicle use and displays a DIC message when it is necessary to change the engine oil and filter.
The oil life system should be reset to 100% only following an oil change.
Resetting the Oil Life System
1. Turn the ignition to ON/RUN, with the engine off.
2. Press the DIC information and reset buttons at the same time to enter the personalization menu.
3. Press the information button until the DIC display shows OIL-LIFE RESET.
4. Press and hold the reset button until the DIC display shows ACKNOWLEDGED.
5. Turn the key to LOCK/OFF.
See Engine Oil Life System.
Tire Sealant and Compressor Kit
Driving for Better Fuel EconomyChevrolet Cobalt Service & Repair Manual. Wheel Hub & Bearing, Replace
Rear
Disc Brakes
1.
Raise and support vehicle, then the
tire and wheel assembly.
2.
Without disconnecting the hydraulic
brake flex hose, remove and support rear brake caliper and bracket
as an assembly.
...