Chevrolet Cobalt Owners Manual: Sheet Metal Damage
Chevrolet Cobalt Owners Manual / Service and Appearance Care / Sheet Metal Damage
If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection.
Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty.
Tires
To clean the tires, use a stiff brush with tire cleaner.
Notice: Using petroleum-based tire dressing
products on the vehicle may damage the paint finish
and/or tires. When applying a tire dressing, ...
Finish Damage
Any stone chips, fractures or deep scratches in the
finish should be repaired right away. Bare metal will
corrode quickly and may develop into major repair
expense.
Minor chips and scratches can b ...
See also:
Chevrolet Cobalt Service & Repair Manual. Intake Manifold, Replace
Removal
1.
Remove air inlet duct and resonator.
2.
Disconnect IAC, TPS and MAP sensor.
3.
Disconnect EVAP and PCV hose.
4.
Disconnect purge solenoid tube and
brake booster hose.
...
Chevrolet Cobalt Owners Manual
- In Brief
- Seats and Restraint System
- Features and Controls
- Instrument Panel
- Driving Your Vehicle
- Service and Appearance Care
- Maintenance Schedule
- Customer Assistance Information
Chevrolet Cobalt Service Manual
- Air Bags
- Air Conditioning & Heater
- Body & Frame
- Brakes
- Cooling System
- Driveline
- Electrical
- Electronic Stability Controls
- Engine Service
Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0049