Chevrolet Cobalt Service & Repair Manual: Precautions
Air Bag System
| 1. |
Prior to disconnecting or servicing
any air bag components, disarm air bag system as outlined under
"Air Bag System Disarming & Arming." |
| 2. |
Air bag system components or seat belt
tensioner units must not be opened or repaired. Always install new
components. |
| 3. |
Always place removed air bag module
so pad is facing upward. |
| 4. |
Air bag module or seat belt tensioner
unit must not be exposed to grease or cleaned with any type of cleaning
agent. |
| 5. |
Keep units clear of heat sources. Do
not expose air bag module or seat belt tensioner units to high temperatures
for even brief periods. |
| 6. |
Do not paint air bag modules to correct
cosmetic flaws. Modules must be replaced. |
| 7. |
Inspect all components prior to installation.
Do not install any components that appear to have been improperly
handled or stored, or that show any signs of damage. |
| 8. |
When carrying live air bag module,
ensure bag opening is facing away from body. |
| 9. |
Avoid working directly in front of
air bag module. It is safer to approach them from sides or below. |
| 10. |
Do not drop air bag system components. |
|
Accident Regardless of Air Bag Deployment
Proper operation of Supplemental
Inflatable Restraint (SIR) sensing system requires that any repairs to vehicle
structure return vehicle struc ...
See also:
Chevrolet Cobalt Service & Repair Manual. Pinpoint Test
Ensure battery voltage is greater
than 12 volts prior to and during pinpoint test.
Caution: Do not have a battery
charger attached during vehicle testing.
Warning: Never use electrical
test equipment on any circuit related to the SRS unless instructed by ...
Air Bags
Collision Inspection