Chevrolet Cobalt Service & Repair Manual: Front Bumper Fascia Bracket

Chevrolet Cobalt Service & Repair Manual / Body & Frame / Front Bumper Fascia Bracket

Removal

1. Remove front bumper fascia as outlined in Front Bumper Fascia.
2. Remove front bumper fascia bracket bolts (1), Fig. 1.
3. Remove front bumper fascia bracket (2).

Installation

1. Position front bumper fascia bracket (2) to fender, Fig. 1.
2. Install bracket bolts. Torque to 62 inch lbs.
3. Install front fascia as outlined in Front Bumper Fascia.

Fig. 1 Front bumper fascia bracket

    Front Bumper Fascia
    Removal 1. Remove headlamp assemblies, as required. 2. Remove front fender liners as outlined in Front Fender Liner. ...

    Front Bumper Fascia Opening Cover
    Removal 1. Remove front bumper fascia, as outlined in Front Bumper Fascia. 2. Remove front bumper fascia lower grille push pin ret ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Tire Pressure Monitor Lamp, Diagnosis
    A visual inspection must always be performed to confirm the presence of aftermarket components, potential collision damage, or areas of concern. The Body Control Module (BCM) receives a Radio Frequency (RF) transmission from each tire pressure sensor. Each sensor ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037