Chevrolet Cobalt Service & Repair Manual: Front Fender
Removal
| Apply tape along door and fascia
edge to protect paint. |
| 1. |
Raise and support vehicle. |
| 2. |
Remove tire and wheel assembly. |
| 3. |
Remove front fender liner as outlined
in Front Fender Liner. |
| 4. |
Remove front fender bolts (1), Fig.
1. |
| 5. |
Remove front fender (2). |
|
Installation
| 1. |
Install front fender (2), Fig.
1. |
| 2. |
Install front fender bolts (1).
Torque to 89 inch lbs. |
| 3. |
Install front fender liner as outlined
in Front Fender Liner. |
| 4. |
Install tire and wheel assembly. |
|
Fig. 1 Front fender
Removal
1.
Remove front bumper fascia, as outlined
in Front Bumper Fascia.
2.
Remove front bumper fascia grille push
pin retainers ...
Removal
1.
Lift and support vehicle.
2.
Remove tire and wheel assembly.
3.
Remove front wheelhouse liner retainer ...
See also:
Chevrolet Cobalt Service & Repair Manual. Fog Lamp Bulb, Replace
Warning: Halogen bulbs contain
gas under pressure. Handling a bulb improperly could cause it to shatter
into flying glass fragments. To help avoid personal injury: Turn off the
lamp switch and allow the bulb to cool before changing the bulb. Leave the
lamp switch OFF until the ...
Front Bumper Upper Fascia Grille
Front Fender Liner