Chevrolet Cobalt Service & Repair Manual: Fuel Filler Door

Removal

1. Remove fuel filler pocket.
2. Apply tape around fuel filler area to protect paint.
3. Use a drill to remove rivets (1), Fig. 1, from fuel filler door.
4. Remove fuel filler door (2).

Installation

1. Position fuel filler door to body and align mounting holes, Fig. 1.
2. Install rivets (1) using appropriate rivet gun.
3. Install fuel filler pocket.
4. Remove protective tape from body.

Fig. 1 Fuel filler door

    Front Side Door Upper & Lower Hinge
    Removal Replace only one hinge at a time. 1. Remove hinge to hinge pillar bolts (1) or (4), Fig. 1. 2. Remove hinge to door ...

    Hood
    Removal 1. Open and support hood. 2. Install a protective covering over fenders. 3. Remove hood insulator, ...

    See also:

    Chevrolet Cobalt Owners Manual. Engine Coolant Heater
    The engine coolant heater can provide easier starting and better fuel economy during engine warm-up in cold weather condition at or below 0°F (-18°C). Vehicles with am engine coolant heater should be plugged in at least four hours before starting. An internal thermostat in the plug-end of the ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.4112