Chevrolet Cobalt Service & Repair Manual: Coolant Hose, Replace

Chevrolet Cobalt Service & Repair Manual / Cooling System / Coolant Hose, Replace

Lower

1. Drain coolant into a suitable container.
2. Loosen hose clamp connecting hose to radiator.
3. Loosen hose clamp connecting hose to water pump inlet.
4. Remove hose from vehicle.
5. Reverse procedure to install.

Upper

1. Drain coolant into a suitable container.
2. Loosen hose clamp connecting hose to radiator.
3. Loosen hose clamp connecting hose to thermostat housing.
4. Remove hose from vehicle.
5. Reverse procedure to install.
    Cooling System
    ...

    Heater Hose, Replace
    Inlet 1. Drain coolant into a suitable container. 2. Loosen hose clamp connecting hose to heater core inlet tube. ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Engine Valves R&R
    Valve stem oil seal alignment and position is critical. An improperly installed valve stem oil seal may lead to excessive oil consumption, and increased vehicle emissions. When replacing multiple valves simultaneously, mark valves in relation to cylinder/port. Keep al ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0033