Chevrolet Cobalt Service & Repair Manual: Blower Motor, Replace
| 1. |
Disconnect blower motor electrical
connectors. |
| 2. |
Remove sound insulator panels as required. |
| 3. |
Remove mounting screws, then the blower
motor assembly. |
| 4. |
Reverse procedure to install, torque
attaching screws to 44 inch lbs. |
|
Coupe
Warning: Halogen bulbs contain
gas under pressure. Handling a bulb improperly could cause it to shatter
into flying glass fragments. To help avoid personal injury: Turn off the
...
The body control module (BCM)
has a bussed electrical center integrated into the housing. Body control
relays and fuses are installed directly on the BCM, which simplifies wiring
an ...
See also:
Chevrolet Cobalt Service & Repair Manual. Relearn
Initialization Sequence
The EBCM performs one initialization
test each ignition cycle. The initialization of the EBCM occurs when the
EBCM detects the there is a minimum of 500 RPM from the ECM by means of
a serial data message and the stop lamp switch is not applied. The initial ...
Back-Up Lamp Bulb, Replace
Body Control System Diagnosis & Testing