Chevrolet Cobalt Service & Repair Manual: Brake Fluid Level Warning Indicator Switch R&R
| Refer to Fig. 1.
when performing the following procedure. |
| 1. |
Remove brake fluid indicator switch
connector. |
| 2. |
Remove brake fluid level indicator
switch. |
| 3. |
Reverse procedure to install. |
|
Fig. 1 Brake fluid switch level indicator switch replacement
The body control module (BCM)
has a bussed electrical center integrated into the housing. Body control
relays and fuses are installed directly on the BCM, which simplifies wiring
an ...
Refer to Fig. 1
when performing following procedure.
1.
Remove lefthand front wheel.
2.
Disconnect back-up lamp connector (1). ...
See also:
Chevrolet Cobalt Service & Repair Manual. Cylinder Head Overhaul
It is usually recommended to send
head to machine shop for complete overhaul.
Cylinder head must be cool before
removing it from engine. Cylinder head warpage can result if a warm or hot
cylinder head is removed.
Place clean shop towels over exposed
e ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Body Control System Diagnosis & Testing
Brake Light Switch R&R