Chevrolet Cobalt Service & Repair Manual: Tail Lamp Bulb, Replace
Coupe
| 2. |
Pull stop, tail and turn signal bulb
(1) straight from socket to remove, Fig. 1. |
| 3. |
Reverse procedure to install. |
|
Sedan
| 2. |
Rotate tail lamp bulb harness (1) sockets
counterclockwise and remove from lamp housing, Fig. 2. |
| 3. |
Pull stop, tail and turn signal lamp
bulb (3) straight from socket to remove, Fig. 2. |
| 4. |
Reverse procedure to install. |
|
Fig. 1 Tail lamp bulb removal. Coupe
Fig. 2 Tail lamp bulb removal. Sedan
Coupe
Warning: Halogen bulbs contain
gas under pressure. Handling a bulb improperly could cause it to shatter
into flying glass fragments. To help avoid personal injury: Turn off the
...
A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern.
The Body Control Module (BC ...
See also:
Chevrolet Cobalt Owners Manual. Jump Starting
If the vehicle's battery has run down, you may want to
use another vehicle and some jumper cables to start
the vehicle. Be sure to use the following steps to do it
safely.
WARNING:
Batteries can hurt you. They can be dangerous
because:
- They contain acid that can burn you.
- They contain ga ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Rear Turn Signal Lamp Bulb, Replace
Tire Pressure Monitor Lamp, Diagnosis