Chevrolet Cobalt Service & Repair Manual: Transmission Control Position Indicator Bulb, Replace
| 1. |
Remove front floor console as outlined
in "Floor Console." |
| 2. |
Disconnect transmission floor shift
control indicator lamp electrical connector (1), Fig.
1. |
| 3. |
Remove transmission control position
indicator bulb (2), Fig. 1. |
| 4. |
Reverse procedure to install. |
|
Fig. 1 Transmission control position indicator bulb removal
A visual inspection must always
be performed to confirm the presence of aftermarket components, potential
collision damage, or areas of concern.
The Body Control Module (BC ...
Front
Coupe
1.
Remove interior trim panel.
2.
Remove water deflector.
3.
Move window to full up position and
...
See also:
Chevrolet Cobalt Service & Repair Manual. EGR Functional Tests
Fuel Injected Gasoline Engine
The EGR systems used on fuel injected
engines are controlled by the ECM. The ECM will store a code in memory when
the EGR system malfunctions. Refer to appropriate "Diagnostic Code Identification
Chart" for code number.
Linear EGR Val ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Tire Pressure Monitor Lamp, Diagnosis
Window Regulator Motor R&R