Chevrolet Cobalt Service & Repair Manual: Starter, Replace

Chevrolet Cobalt Service & Repair Manual / Electrical / Starter & Alternator / Starter, Replace

1. Disconnect battery ground cable from battery.
2. Raise and support vehicle.
3. Remove starter solenoid terminal nut.
4. Remove positive battery cable terminal from starter.
5. Remove starter solenoid wire terminal from starter.
6. Disconnect engine harness connector from starter.
7. Remove starter motor mounting bolts.
8. Remove starter from vehicle.
9. Reverse procedure to install, noting the following:
  a. Torque starter mounting bolts to 30 ft. lbs.
  b. Torque starter solenoid terminal nut to 13 ft. lbs.
    Alternator, Replace
    1. Disconnect battery ground cable from battery. 2. Remove accessory drive belt. 3. Remove engine harness al ...

    Electronic Stability Controls
    ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Body Control System Diagnosis & Testing
    The body control module (BCM) has a bussed electrical center integrated into the housing. Body control relays and fuses are installed directly on the BCM, which simplifies wiring and junction blocks on the vehicle. The body control system consists of the BCM and its associated ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0045