Chevrolet Cobalt Service & Repair Manual: Stabilizer Bushing R&R
| Refer to Fig. 1
when performing the following procedure. |
| 1. |
Raise and support the vehicle. |
| 2. |
Remove front stabilizer shaft clamp
bolt. |
| 3. |
Remove front stabilizer shaft clamp
nut. |
| 4. |
Remove front stabilizer shaft clamp. |
| 5. |
Remove front stabilizer shaft insulator. |
| 6. |
Reverse procedure to install. Torque
front stabilizer shaft clamp nut and bolt to 37 ft. lbs. |
|
Fig. 1 Stabilizer shaft insulator replacement
Front
1.
Raise and support vehicle, then remove
tire and wheel assemblies.
2.
Remove rear transaxle mount.
3.
...
1.
Ensure front wheels are in straight
ahead position, then secure steering wheel to prevent rotation.
2.
Raise and support vehicle, then ...
See also:
Chevrolet Cobalt Owners Manual. Brakes
Brake Fluid
The brake master
cylinder and, on manual
transmission vehicles, the
clutch hydraulic system
use the same reservoir
filled with DOT 3 brake
fluid.
See Engine Compartment Overview for
the location of the reservoir.
There are only two reasons why the brake fluid level in
the re ...
Chevrolet Cobalt Owners Manual
Chevrolet Cobalt Service Manual
Stabilizer Bar, Replace
Steering Gear, Replace