This vehicle is equipped with an electronic shift lock
release system. The shift lock release is designed to:
- Prevent ignition key removal unless the shift lever
is in P (Park) with the shift lever button fully
released, and
- Prevent movement of the shift lever out of
P (Park) unless the ignition is in ON/RUN or
ACC/ACCESSORY and the regular brake pedal
is applied.
The shift lock release is always functional except in the case of a an uncharged or low voltage (less than 9 volt) battery.
If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery.
See Jump Starting for more information.
To shift out of P (Park): 1. Apply the brake pedal.
2. Then press the shift lever button.
3. Move the shift lever to the desired position.
If you still are unable to shift out of P (Park): 1. Fully release the shift lever button.
2. While holding down the brake pedal, press the shift lever button again.
3. Move the shift lever to the desired position.
If you still cannot move the shift lever from P (Park), consult your dealer/retailer or a professional towing service.
Shifting Into Park (Automatic Transmission)
Parking the Vehicle (Manual Transmission)Chevrolet Cobalt Owners Manual. Wheel Alignment and Tire Balance
The tires and wheels on your vehicle were aligned and
balanced carefully at the factory to give you the longest
tire life and best overall performance. Adjustments
to wheel alignment and tire balancing will not be
necessary on a regular basis. However, if you notice
unusual tire wear or your ve ...