Chevrolet Cobalt Service & Repair Manual: Coolant Hose, Replace

Lower

1. Drain coolant into a suitable container.
2. Loosen hose clamp connecting hose to radiator.
3. Loosen hose clamp connecting hose to water pump inlet.
4. Remove hose from vehicle.
5. Reverse procedure to install.

Upper

1. Drain coolant into a suitable container.
2. Loosen hose clamp connecting hose to radiator.
3. Loosen hose clamp connecting hose to thermostat housing.
4. Remove hose from vehicle.
5. Reverse procedure to install.
    Cooling System
    ...

    Heater Hose, Replace
    Inlet 1. Drain coolant into a suitable container. 2. Loosen hose clamp connecting hose to heater core inlet tube. ...

    See also:

    Chevrolet Cobalt Owners Manual. Engine Oil
    Checking Engine Oil It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the oil must be warm and the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engine Compartment Overview for the location of the eng ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2026 www.cheviguide.com - Chevrolet Auto Manuals - 0.0061