Chevrolet Cobalt Service & Repair Manual: Clutch Start Switch, Replace

1. Remove driver's instrument panel knee bolster.
2. Disconnect clutch start switch electrical connector.
3. Remove clutch start switch from pedal bracket.
4. Reverse procedure to install. Ensure starter cranks only when clutch pedal is fully depressed.
    Brake Light Switch R&R
    Refer to Fig. 1 when performing following procedure. 1. Remove lefthand front wheel. 2. Disconnect back-up lamp connector (1). ...

    Dome Lamp Bulb, Replace
    1. Remove dome lamp lens (1) from dome lamp, Fig. 1. 2. Remove bulb (2) from dome lamp, Fig. 1. 3. Rev ...

    See also:

    Chevrolet Cobalt Service & Repair Manual. Coolant Hose, Replace
    Lower 1. Drain coolant into a suitable container. 2. Loosen hose clamp connecting hose to radiator. 3. Loosen hose clamp connecting hose to water pump inlet. 4. Remove hose ...

    Chevrolet Cobalt Owners Manual

    Chevrolet Cobalt Service Manual


    Copyright © 2025 www.cheviguide.com - Chevrolet Auto Manuals - 0.0037